Water heater and drain upsell campaigns
Run water heater and drain upsell campaigns.
Read the lesson
Goal: Find past customers due for water heater or drain work, and offer it with consent.
You need: Custom fields, the Tag library, saved views and a published workflow. SMS registration done.
Why this matters
Every plumbing customer list hides future jobs. A water heater has a working life. When one is old, a failure is coming. The homeowner does not know the age. The plumber who installed or serviced it does.
Drains are the same. Some homes clog every year: old pipes, big trees, a busy kitchen. Those customers will call again. The only question is which plumber they call.
An upsell campaign uses what the business already knows. It offers a replacement or a drain cleaning before the failure. The customer avoids a cold shower or a flooded basement. The plumber books planned work instead of a night call.
The campaign only works if the data exists. If nobody records the heater's install year, nobody can find the old heaters. That one field is the whole program.
Size changes the setup:
- Owner-operator. The owner records the install year on their own close-out. A small list still pays.
- Fleet (Northside Plumbing). Every tech or the office records it on every job. Make it part of close-out.
- Multi-location. Use the same field and tag names at every location, so lists match.
Field, tag, view, send
The campaign has four links in a chain. If one breaks, the campaign finds nobody.
| Link | Tool | Example |
|---|---|---|
| Field | Number custom field | Water heater install year |
| Tag | Tag library | old-water-heater |
| View | Contacts → Save Current View | "Old water heaters" |
| Send | Workflow with consent check | A text 30 days after tagging |
The owner sets the age rule. For example, a heater older than their chosen number of years gets the old-water-heater tag. You do not set the rule. You record it.
Drain customers get a tag too, such as drain-repeat. The owner decides what counts: two drain calls in one year, for example.
Consent comes first. Only contacts who agreed to texts get texts. ServiceAgent always honors STOP replies. Quiet Hours default to 9 PM to 8 AM. Keep each offer under 160 plain characters, or it splits into two segments.
The offer must be honest. Use the owner's real prices and real terms. Never write that a heater will fail soon. Write that it has reached the age where the owner recommends a check.
An honest water heater offer
- Northside Plumbing · 10:00 amHi Pat, it's Northside Plumbing. Your water heater has reached the age where we recommend a check. Book here: [link]
- Customer · 10:22 amIs it really that old?
- noteReply lands in Conversations. The office answers
- Northside Plumbing · 10:40 amOur records show it went in [YEAR]. A check takes about an hour. Want a time this week?
Build it in ServiceAgent
- Open
Settings→Contacts & Pipeline→Custom fields. Add a Number field,Water heater install year. - Open
Tag library. Createold-water-heater,drain-repeatand the consent tag the client uses. - Make the install year part of every job close-out. The office fills it from the tech's notes.
- Tag past customers. Filter by the install year, then add
old-water-heaterto each match. - Open
Contacts. Filter by the tag and clickSave Current View. Name it "Old water heaters". - Open
Workflows→Build from scratch. ChooseEvent Trigger→Contact Updated. - Add a
Condition: tags containold-water-heater. Add a secondConditionfor SMS consent. Check which field or tag holds consent in the client's account. Add a thirdCondition: tags do not containwh-offer-sent.Contact Updatedfires on every edit, so this stops repeat texts. Then addUpdate Contactwith the tagwh-offer-sentat once, before the delay. A second edit during the wait then stops at this gate. - Add a
Delayof 30 days, then theSend SMSoffer with the booking link. - Before the send, add a
Conditionthat skips anyone already booked for the offer. For the second text, add aDelayof 7 days, the same booked check, then a short reminder. - Click
Test, thenPublish.
Check it works: Update a test contact with your own phone number and the tag. Confirm the run shows in History → View run history.
The water heater workflow
- Close-out records the install year; office adds old-water-heater
- SMS consent, and no offer sent yet?YesTag wh-offer-sent, then Delay 30 daysNoStop. No textEnds here
- Already booked for the offer?YesSkip the sendEnds hereNoSend SMS offer
- Delay 7 days, same check, one reminder
Worked example: Northside Plumbing
Northside has 1,200 past customers. These are example inputs.
- 18% have a recorded heater past the owner's age rule: 1,200 × 18% = 216.
- 70% of those gave SMS consent: 216 × 70% = 151.2, so 151 contacts.
Northside's water heater list
Credits:
- 2 texts each, the offer and one reminder, at 2 credits: 4 credits.
- 1 workflow run: 1 credit.
- Total: 151 × 5 = 755 credits.
Campaign credits
At the Safe Pack rate of $20 for 500 credits, 755 credits cost about $30.
Results depend on the client. Say 6% book an install, as an example: 151 × 6% = 9.06, so 9 installs. At an example $1,800 install, that is 9 × $1,800 = $16,200.
Report the real bookings after 30 days. Replace the example rate with Northside's own.
The drain program
Drain customers need a different offer. They do not need a new product. They need a visit before the next clog.
Use the drain-repeat tag. The office adds it when a home has had the number of drain calls the owner sets. Then offer a yearly drain cleaning at the owner's price.
The best time to ask is right after the second clearing. The customer remembers the mess. Ask in person on the job first. Then send one text a week later with the booking link.
If the customer says yes, book a Recurring Appointment every 12 months. That keeps the visit on the calendar without anyone remembering it. Track how many drain customers book the yearly visit, and how many emergency drain calls they make after.
Turning a repeat clog into a yearly visit
- Second clearingTech asks in person; office adds drain-repeat
- One week laterOne text with the booking link
- Customer says yesRecurring Appointment every 12 months
- Each yearCount yearly visits and emergency drain calls
When a customer replies
Some customers will reply with questions instead of booking. "Is my heater really that old?" "What size do I need?" These replies land in Conversations.
A person answers them, using the install year on the contact. Answer within the business day. If the customer books, tag them so the saved view stops showing them. If they say no, note it on the contact and leave them alone for a year.
Common mistakes
- Dropping the install year field because close-out feels slow. Fix: keep it on every close-out. Without it, the saved view finds nobody.
- Texting the whole list. Fix: send only to contacts with SMS consent.
- Scare words. Fix: say the heater reached the age where the owner recommends a check. Never predict a failure.
- Emoji in the offer. Fix: emoji cut a segment to 70 characters and double the cost.
- No check for people already booked. Fix: add a
Conditionbefore each send.
Do this now
Add the Water heater install year field to one client account. Write the close-out rule on one line for the office. Then build the saved view and a draft workflow, and run Test.
Practice the conversation
- Owner My guys say the install year field slows down every close-out.
- Operator It takes ten seconds. It is also the only way to find the old heaters.
- Owner Can we skip it and text everybody?
- Operator Texting everybody wastes credits and annoys people with new heaters. Some will reply STOP.
- Owner How many would we text?
- Operator On your list, about 151 people with old heaters and consent. That is about $30 in credits.
- Owner And what do we say?
- Operator That their heater reached the age you recommend a check. Your price, your terms, no scare words.
- Owner Okay. Make it part of close-out.
Quick check
- Plumbers say the water heater install year field slows down close-out. The owner wants to drop it. What do you advise?
- Drop it, and text every past customer instead
- Drop it, and let the AI guess heater age on calls
- Keep it optional, and fill it once a year
- Keep it, and make it part of every job close-out
- A list has 300 consented contacts. Each gets 2 texts and 1 workflow run. How many credits does it use?
- 600
- 900
- 1,200
- 1,500
- Who gets the water heater text?
- Every contact with a mobile number
- Contacts tagged `old-water-heater` who gave SMS consent
- Every customer from the last five years
- Anyone who called about any plumbing problem
ServiceAgent UniversityLearn to run a service business on autopilot. Free courses, Blueprints and certification for Service Operators.