Mixing emergencies with scheduled work
Mix emergency calls with scheduled electrical work on the same calendar.
Read the lesson
Goal: Hold room for emergencies on an electrician's calendar, and move scheduled jobs without surprising customers.
You need: Jobs with Day view, Block Time, Conversations, and Growth or a job-text workflow.
Why this matters
An electrical shop runs two businesses on one calendar. One is planned work: panel swaps, EV chargers, remodel wiring. The other is emergencies: a dead circuit, a tripping main, a burning outlet.
Planned work pays the bills. Emergencies pay well and win loyal customers. The trouble starts when they collide. An emergency pulls an electrician off their 11 am job. The 11 am customer took the morning off work. Nobody calls them. They sit at home, then post a one-star review.
Two habits prevent this. First, hold some time every day for emergencies. Second, when a planned job must move, tell the customer at once.
A bumped customer, before and after
- 11 am job moved to 1 pm
- Customer waits at home all morning
- Office calls after lunch
- Customer cancels and posts a review
- 11 am job moved to 1 pm
- Text at 10:25 am with the new time
- Customer replies or plans around it
- Job kept
ServiceAgent does not decide which job is more important. The dispatcher does. ServiceAgent gives them a clear board, a way to hold time, and a fast way to text the customer.
Size changes the setup:
- Owner-operator. The owner's own afternoon is the buffer. Book planned work in the mornings.
- Fleet (Volt Pro Electric, 10 electricians). Two or three electricians hold an afternoon block each day.
- Multi-location. Each location holds its own block, sized to its own emergency volume.
Hold time, release time, tell the customer
The method has three parts.
Hold. Use Block Time on selected electricians for an emergency window, such as 1 pm to 4 pm. Block Time is for one staff member at a time, as a Break or Time Off. Online booking cannot use that time.
Release. Pick a release time with the dispatcher, such as 11 am. If no emergency has come in, the dispatcher removes the block and fills the window. Good fillers are customers who asked for an earlier slot.
Tell. When a planned job must move, the customer hears before the old arrival window starts. A text from Conversations takes a minute. It gives the new time and a reason, and asks them to reply if the new time does not work.
The reschedule text
- note10:20 am: an emergency pulls the electrician
- Volt Pro Electric · 10:25 amHi Sam, it's Volt Pro. An emergency moved your 11 am visit to 1 pm today. Reply if 1 pm does not work.
- Customer · 10:31 am1 pm works. Thanks for the heads-up.
There is no automatic way to bump a job. There is no travel-time setting either, so the Buffer Between Appointments setting stands in for drive time.
The dispatcher's day has four fixed checks. At 7:30 am, check the board in Day view, filtered by Staff. At 11 am, release unused emergency blocks. At 4:30 pm, check tomorrow's board and blocks. Any time a job moves, text the customer before the old window starts.
An electrician's day with an emergency block
- 7:30 amDispatcher checks the board in Day view
- 8 am to noonPlanned work
- 11:00 amRelease check: fill unused blocks
- 1 pm to 4 pmEmergency block, held with Block Time
- 4:30 pmCheck tomorrow's board and blocks
On Growth, every electrician has a login and appears in Assigned To. On Core, techs without a login cannot be assigned. Text each job to them with a workflow on Appointment Scheduled, or move to Growth.
Build it in ServiceAgent
- Open
Jobs→Dayview. Use the Staff filter to see each electrician's day. - Agree with the owner how many electricians hold a block each day.
- For each one, use
Block Timeas aBreakfrom 1 pm to 4 pm. - Open
Voice Agents→Knowledge→Quick answers. Add the owner's approved answer for emergency arrival times. - Write a reschedule text with the owner. Keep it under 160 plain characters.
- Save the text where the dispatcher can paste it from
Conversations. - Check
Settings→Service Catalog→Booking rules. SetBuffer Between Appointments (minutes)to real drive time. - Build a workflow with a daily
Scheduled Triggerat 11 am. Add aCreate CRM Taskstep: "Release unused emergency blocks." Set the dispatcher asOwner.
Check it works: Move a test appointment for a contact with your own number. Send the reschedule text from Conversations. Confirm it arrives and reads well on a phone.
Worked example: Volt Pro Electric
Volt Pro has 10 electricians and runs Growth. These are example inputs from its last month.
- Emergencies average 3 a day.
- Each takes about 2 hours, including drive time.
- Emergency hours a day: 3 × 2 = 6 hours.
Volt Pro holds 2 electricians from 1 pm to 4 pm. That is 2 × 3 = 6 hours a day, which matches the average.
Some days bring 5 emergencies. That is 5 × 2 = 10 hours, or 4 hours more than the block. On those days, the dispatcher moves up to 2 planned jobs. Each moved customer gets a text before the old window.
Sizing Volt Pro's emergency block
Other days bring 1 emergency. That leaves 4 held hours unused. At the 11 am release, the dispatcher fills them with jobs from customers who wanted an earlier slot.
The cost of a surprise is real. Say one bumped customer a week is not told, and half of them cancel. At an example $650 planned job, that is about 2 lost jobs a month, or $1,300.
Choosing which job to move
When a job must move, the dispatcher picks it with three questions. Which job is easiest to move? Which customer is flexible? Which job is shortest?
A quote visit or a small add-on is usually easier to move than a panel swap with a utility appointment. A retired customer who is home all day is often flexible. A customer who took a day off work is not. The dispatcher notes flexible customers with a tag, such as flexible-time, so the choice is fast next time.
Never move the same customer twice in a row. If a job moved once, it gets priority the next day.
Which planned job to move
- An emergency needs a planned slot
- Is there an easy job, such as a quote visit?YesMove that jobNoAsk the next question
- Is a customer tagged flexible-time?YesMove that jobNoMove the shortest job
- Set the new time in Jobs
- Text from Conversations before the old window
Measuring the result
After a month, check two numbers. First, Analytics → Appointments → Cancellations. Fewer cancellations after a move mean the texts work. Second, count the hours of held time that went unused. If most blocks go unused, shrink them. If bumps happen most days, grow them.
Common mistakes
- No held time. Fix: block emergency hours every day, sized to the average volume.
- Held time never released. Fix: release unused blocks at a fixed time, such as 11 am.
- Calling the bumped customer after lunch. Fix: text before the old arrival window starts.
- Moving jobs without telling the AI's answers. Fix: keep the emergency arrival answer in
Quick answershonest on busy days. - Zero buffer between jobs. Fix: set the buffer to drive time, so one late job does not ruin the day.
Do this now
Pull last month's emergency count for one electrical client. Divide by working days and multiply by job length. That is the daily block size. Set the blocks in Jobs, and write the reschedule text with the owner.
Practice the conversation
- Owner Emergencies wreck my schedule every week.
- Operator Then we plan for them. You average about 6 emergency hours a day.
- Owner So what do we do?
- Operator Two electricians hold 1 to 4 pm. Online booking cannot fill that time.
- Owner And if no emergency comes?
- Operator Your dispatcher releases it at 11 and fills it with people who wanted an earlier slot.
- Owner What about the guy I bump?
- Operator They get a text with the new time before their old window starts. It takes a minute.
- Owner We usually call after lunch.
- Operator By then they have waited all morning. That is the review you do not want.
Quick check
- An emergency pulls an electrician off their 11 am job. The office moves it to 1 pm and plans to call after lunch. What should change?
- Nothing, because a call after lunch is soon enough
- Text the customer the new time now, before the old window starts
- Leave the job at 11 am and send someone later
- Cancel the job and ask the customer to rebook online
- A shop averages 4 emergencies a day at 1.5 hours each. Electricians hold 3-hour blocks. How many electricians should hold a block?
- 1
- 2
- 3
- 4
- What stops online booking from filling the emergency window?
- A travel-time setting
- `Block Time` on the electricians who hold the window
- A hold rule in `Booking rules`
- A `Condition` step in a workflow
ServiceAgent UniversityLearn to run a service business on autopilot. Free courses, Blueprints and certification for Service Operators.