Emergency triage and escalate-to-human with live call transfer
Decide which calls are real emergencies, give the client's own safety line, and transfer them live to a human.
Read the lesson
Goal: Send true emergencies to a person in seconds, and keep every other call with the AI.
You need: The emergency row of the call map, the owner's own emergency cases, and the on-call phone number.
Why this matters
Emergency calls are rare but they matter most. On Northside's call map, they were 9 of 100 calls. Each one is a burst pipe, a flooded basement or a home with no heat. These callers also pay the most and remember who answered.
An agent that fumbles an emergency can cause real harm. An agent that transfers too much has another problem. Staff take every call again, and the business loses the point of the AI.
Your job is a clear line. The owner decides what an emergency is. The agent matches what the caller says against the owner's list. Then it sends those calls to a person, fast.
The owner writes the list
The agent does not judge danger by itself. It matches the caller's words against clear cases. Vague rules like "anything urgent" fail. The agent cannot tell what the owner meant.
Ask the owner for cases in their own words. Good cases name a situation and a condition:
- "No heat, and there is a baby or an elderly person at home."
- "Water is coming through the ceiling right now."
- "Sewage is backing up into the house."
Vague rules vs clear cases
- Anything urgent
- Emergencies
- Bad leaks
- No heat, and a baby or an elderly person at home
- Water coming through the ceiling right now
- Sewage backing up into the house
The safety wording is also the client's. Each client writes its own words for dangerous calls, with its own advisors. SAU gives no standard safety script. You put the owner's exact words into the agent. You do not write them yourself.
Date the list and keep the owner's written yes on file. Review it at the start of each season.
The transfer settings
Open Voice Agents, your agent, then the Actions tab. Four settings control the transfer. The figure shows each one and what it does.
The four transfer settings
Transfer settings
The transfer is a plain transfer. The person picks up and the caller is there. A briefed "warm transfer" is coming soon to ServiceAgent. Until then, the agent collects name, address and the problem before it transfers. It repeats the key facts to the caller just before it transfers. Tell the on-call tech to confirm the address first.
The transfer phone number holds one number. There is no on-call rotation. Most fleets solve this with one on-call phone. The tech on duty carries it, and it passes to the next tech each week. Or someone updates the number in Actions at each shift change.
What the agent says while it transfers
A transfer should feel calm and fast. Write the agent's words for the hand-off into the emergency block. Keep the order fixed:
- Repeat the problem in one short sentence, so the caller knows they were heard.
- Confirm the address. The on-call tech needs it first.
- Say who the caller is about to reach, such as "the on-call technician".
- Transfer.
An emergency hand-off
- CallerWater is coming through the ceiling
- AI agentMatches the owner's case
- AI agentGets name, address and phone
- AI agentRepeats the problem, confirms the address
- AI agentNames who the caller will reach
- AI agentTransfers the call
- On-call techAnswers and takes over
Do not let the agent give repair advice while it waits. Even helpful tips can be wrong for that home. If the owner wants a safety line read, it is their line, word for word.
Keep the emergency questions to the minimum. Name, address, phone and the problem are enough. Every extra question delays the person who can help.
When nobody answers the transfer
Plan for a missed transfer. A tech asleep at 2 a.m. may not pick up on the first ring.
- Write a rule in the voice instructions. If the transfer fails, the agent takes details and promises a fast call back.
- Turn on
Create a follow-up task. The agent creates a task marked urgent for the office. - Give the owner a second name to call back. That person checks for urgent tasks.
Test what the caller hears when the transfer number does not answer. Do it in your practice account before launch.
Emergency path
- Caller describes the problem
- Does it match a case on the owner's list?YesCollect name, address, phone, problemNoBook, answer or task, as the map saysEnds here
- Transfer to your teamRings the on-call phone
- Does the on-call phone answer?YesThe tech takes the callEnds hereNoPromise a fast call back
- Urgent follow-up task if nobody answered
Transfer only on agreed rules
In week 1, office staff often ask for more transfers. It feels safer to them. It is not. If staff take most calls, you never learn where the agent fails. The gaps in the flow stay hidden.
Transfer only on the owner's list and any other agreed rules. Read the transcripts each week. Fix the flow where the agent struggles. Then the agent gets better, and staff get their time back.
Review transfers every week
Each week, open Voice Agents and read every transferred call. Ask three questions about each one:
- Was it on the owner's list? If not, why did the agent transfer it?
- How long did the caller wait before the transfer?
- Did a person answer? If not, did the call back happen?
Bring the answers to the owner once a month. Add a case to the list or remove one, with their written yes.
Size changes the plan
- Owner-operator: The transfer number is usually the owner's cell. Keep the emergency list very short, because every transfer wakes them up.
- Fleet: Use a shared on-call phone. Write down who carries it each week and who backs them up.
- Multi-location: Each location may have its own on-call person. Use one agent per location number, each with its own transfer number.
Build it in ServiceAgent
- Meet the owner. Get the emergency cases in their own words. Get their safety wording, if they want the agent to read one.
- Open
Voice Agents, your agent,Actions. Turn onTransfer to your team. - Enter the on-call phone number.
- Under
Transfer when…, turn onEmergency. - Set
After-hours behaviortoTriage urgent vs routine. - Set
Human handoff behaviortoAlways transfer urgent calls. - Open
Basics. Paste the owner's cases into the emergency block of the voice instructions. Paste their safety wording exactly as written. - Add the missed-transfer rule and turn on
Create a follow-up task. - Run
Talk in browsertests. Use 3 true emergencies and 3 calls that sound urgent but are not on the list. - Run one real call with
Call my phoneto check the transfer rings the on-call phone. - Check it works: true emergencies transfer within about 1 minute. Routine calls book instead.
Worked example: Polar Air Services
Polar Air has about 20 techs and runs on Growth. These are example inputs: about 50 calls a business day, or 50 × 22 = 1,100 calls a month. HVAC gets 9.8% to 14.1% of its calls after hours, by month.
- Mildest month: 1,100 × 9.8% = about 108 after-hours calls.
- Busiest month: 1,100 × 14.1% = about 155 after-hours calls.
The owner's list has 4 cases. In past logs, about 1 in 5 after-hours calls matched them. That is also an example input.
- Mildest month: 108 × 20% = about 22 transfers.
- Busiest month: 155 × 20% = 31 transfers.
Night transfers at Polar Air, busiest month
Now the bad version. The CSR lead asks to transfer every after-hours call. In the busiest month, that is 155 calls to the on-call tech. That is 155 wake-ups instead of 31. Most of them are routine tune-ups the agent could book. The tech gets tired, misses a real emergency, and the owner blames the AI.
On-call wake-ups in the busiest month
With the list, the on-call tech hears from the AI about once a night. The agent books the rest for the morning.
Common mistakes
- Vague cases. "Anything urgent" cannot be matched. Fix: get clear cases in the owner's own words.
- Writing safety words yourself. Fix: the client writes its own safety wording; you paste it exactly.
- Transferring almost everything. You never learn what to fix. Fix: transfer only on agreed rules.
- One number, no plan. The transfer rings a tech who went off shift. Fix: a shared on-call phone, or update the number at each shift change.
- No missed-transfer plan. Fix: a call-back rule plus an urgent follow-up task.
Do this now
Write an emergency worksheet for a practice business. List 4 cases in "situation plus condition" form. Name the transfer number and who carries it. Write the missed-transfer rule. Then run 6 browser tests and record which ones transferred.
Practice the conversation
- Operator When is a call an emergency for you? I need the cases in your words.
- Owner Anything urgent. You know what I mean.
- Operator The AI can't guess. Give me the calls that would make you drive out at 2 a.m.
- Owner No heat with a baby or an old person in the house. Water through a ceiling.
- Operator Good. Those transfer straight to your on-call tech. Everything else books for morning.
- Owner My office wants all calls sent to them for a while.
- Operator Then we never learn what to fix. Let's transfer on your list and review weekly.
- Owner And if my tech doesn't pick up?
- Operator The AI promises a fast call back and creates an urgent task. Who checks those?
- Owner My dispatcher, Linda.
Quick check
- An HVAC owner writes their emergency list as one line: "anything urgent". What do you do?
- Keep it, because the agent can judge urgency
- Send every after-hours call to the on-call tech
- Get clear cases from them in their own words, such as no heat with a baby
- Copy another HVAC client's list
- In week 1, the CSR lead wants almost every AI call transferred to them. What is the problem?
- Nothing, because a person on every call is safest
- Transfers cost extra credits on Core
- You never learn what to fix; transfer only on agreed rules
- The agent cannot transfer during business hours
- A fleet has 3 on-call techs who rotate each week. How do you set the transfer?
- Enter all 3 numbers in the transfer field
- Use one shared on-call phone, or update the number at each shift change
- Turn on the rotation setting in `Actions`
- Transfer to the office line only
ServiceAgent UniversityLearn to run a service business on autopilot. Free courses, Blueprints and certification for Service Operators.